Dell Inspiron Liquid Damage Repair in Hyderabad

Spilled chai, water or juice on your Dell Inspiron? Stop using it immediately — do not charge it or press the power button. Liquid + a powered motherboard = corrosion within hours. We collect the Dell Inspiron same-day, strip it to the chassis in-lab, ultrasonic-clean the motherboard, replace corroded components and reassemble. 24-72 hr turnaround in our lab. Success rate is 75-85% when we receive the laptop within 12 hours of the spill. Free diagnosis before quote — if it’s unrecoverable, No Fix — No Fee.

A Inspiron 3000 / 5000 / 7000 series exposed to liquid needs to be powered off immediately and brought in for ultrasonic cleaning within 48 hours — the longer corrosion is left on the motherboard, the more components are destroyed. We do not charge for diagnosis if the unit is not recoverable.

Inspiron 3000 / 5000 / 7000 series at a glance

• Consumer mainstream: 13”–17” options; Intel 12th/13th gen or AMD Ryzen 5000/7000
• 3000 series uses polycarbonate; 7000 series switches to aluminium lid and OctaCore options
• 41 Wh (budget 3000) to 86 Wh (Inspiron 16 Plus); 45–130 W charger depending on tier
• Largest-volume Dell line in India — widest parts availability across Hyderabad

Why Liquid Damage Repair fails on this model

Liquid damage on the Inspiron 3000 / 5000 / 7000 series follows a predictable corrosion path specific to the consumer polycarbonate body; 7000 series uses aluminium lid layout. On the Inspiron, liquid most commonly enters through the keyboard (spill from above) or through the bottom vents (placing the laptop on a wet surface). Coffee and tea are the worst fluids due to their sugar and acid content — they form a corrosive crust on PCB traces within 6–12 hours of contact. On the Inspiron, the critical components in the liquid path from the keyboard down are: the keyboard ribbon cable connector, the battery management IC, and the power delivery controller near screen hinge on 3000 series uses a single-rail bracket that cracks the plastic base panel on the left side when the lid is opened past 135° repeatedly. These components sit in the path that liquid takes as it flows to the lowest point of the consumer polycarbonate body; 7000 series uses aluminium lid. The motherboard’s conformal coating (if present on your Inspiron model) slows but does not stop corrosion on connectors and via holes.

How we approach Inspiron 3000 / 5000 / 7000 series Liquid Damage Repair in Hyderabad

We disassemble the Inspiron completely, place the motherboard in an ultrasonic cleaner with isopropyl alcohol, then inspect every connector and component under 40× magnification. Corroded traces are continuity-tested and reflowed or patched as needed. Burnt ICs are identified and replaced at chip level where possible. We provide a frank go/no-go assessment before reassembly. Workshop: 48–96 hours. No Fix No Fee on liquid damage — if the board is unrecoverable, you pay only ₹149. WhatsApp +91 7702503336.