Why HP screen replacement costs vary so widely
HP sells laptops across a ₹30,000–₹1,80,000 range in India, and screen technology tracks that price range closely. The same physical 15.6-inch size can contain a budget TN panel or a high-refresh IPS, and the cost difference between them can be ₹4,000–₹6,000. For Spectre x360 buyers, the jump to OLED adds another ₹8,000–₹10,000 on top of that. Understanding panel types is the key to understanding the cost before you call.
The four panel technologies in HP’s India lineup
- TN (Twisted Nematic): The cheapest technology. Uses liquid crystals that twist between two polarising filters to control light. Advantages: low cost, fast pixel response. Disadvantages: narrow viewing angles (colours shift when viewed off-axis), low colour accuracy. Found in: older Pavilion 3 (HD resolution, 2018–2020 era) and some Pavilion 15 budget variants.
- IPS (In-Plane Switching): The standard panel for mid-range HP. Liquid crystals shift in the same plane, giving near-180° viewing angles and accurate colour. All Pavilion 14/15 FHD models from 2021 onwards ship with IPS. Also used in EliteBook, Envy, OMEN, and Victus. Cost is moderate. High-refresh IPS (144Hz, 240Hz) for gaming variants costs more than standard 60Hz IPS of the same size.
- OLED (Organic Light-Emitting Diode): Each individual pixel generates its own light, eliminating the need for a backlight. Results in perfect blacks, infinite contrast ratio, and vivid colour. Found in: Spectre x360 premium configurations. Replacement cost is highest in the HP lineup.
- 4K touch: Any panel technology at 3840×2160 resolution (four times the pixel density of 1920×1080 Full HD) with an integrated touch digitiser (the layer on top of the screen that detects finger input). Touch panels are two layers glued together; separating them for repair risks cracking both. We replace the complete assembly. Found in: Spectre x360 (4K IPS touch and 4K OLED touch variants), Envy x360 (FHD IPS touch).
All HP screen replacement options — for every series — are listed on our HP service hub. Our laptop screen replacement page covers the full process including how we source and verify panels.
Pavilion 14/15 screen costs — most common HP screen jobs
The HP Pavilion 14 and 15.6-inch are the highest-volume HP screen replacements we perform in India. The screens are accessible (the lid bezel pops off with a pry tool and the panel is held by four to six screws) and panels are widely available. This keeps labour time short and sourcing easy.
Pavilion 14 (non-touch, HD or FHD)
Most Pavilion 14 models shipped in India come in two configurations: HD (1366×768, the lower-resolution option) and FHD (Full HD, 1920×1080). HD panels on the older Pavilion 14s (2018–2020) use TN technology and are the cheapest HP panels to replace. FHD IPS panels from 2021 onwards cost slightly more but produce dramatically better image quality. If your Pavilion 14 has a TN panel, a cracked screen is an opportunity to upgrade to IPS during replacement. Cost: ₹3,800–₹6,500 (exact depends on resolution and technology).
Pavilion 15.6 (non-touch FHD)
The most common HP screen job overall. The 15.6-inch FHD IPS panel in the Pavilion 15 has been stable across the 2021–2024 generations, with consistent part numbers and good availability. The eDP connector (the thin digital signal cable that carries video data from the motherboard to the panel) on Pavilion 15 is a standard 30-pin type, which means most replacement panels are plug-compatible. Cost: ₹5,500–₹8,500.
Pavilion 15.6 (touch FHD)
The touch variant adds a capacitive digitiser layer bonded to the IPS panel. When the screen cracks, both layers are usually damaged. We replace the full digitiser-plus-panel assembly. The touch cable is a separate ribbon from the display cable and must be reconnected to the touch controller on the motherboard. Cost: ₹7,000–₹10,500.
EliteBook 840/850 screen costs — business-grade panels
HP EliteBook 840 and 850 use 14-inch and 15.6-inch IPS panels respectively, but these are not the same IPS panels found in consumer Pavilion machines. EliteBook panels have tighter colour calibration, narrower light bleed, and in some G8/G9 configurations include HP’s Sure View privacy filter (an integrated privacy screen that makes the display visible only from directly in front, to protect sensitive data in public spaces).
EliteBook 840 G5/G6 (FHD, standard)
The most common EliteBook screen we replace. Standard FHD IPS, no Sure View, matte anti-glare coating. Panel part numbers are HP-specific and slightly more expensive to source than consumer Pavilion equivalents, reflecting the tighter spec. Cost: ₹6,000–₹9,500.
EliteBook 840 G8/G9 with Sure View
Sure View panels integrate a privacy filter directly into the panel stack (unlike clip-on privacy screens which are external accessories). When the screen cracks, the privacy filter is destroyed with it, and you must replace the entire Sure View panel assembly — standard IPS replacement is not an option if you want to maintain the privacy function. Sure View panels are HP-specific OEM components with limited aftermarket availability, which drives up cost. Cost: ₹8,000–₹13,000.
All EliteBook screen variants and availability are on our HP repair hub — message us the exact model number and G-series generation for a precise quote.
HP OMEN 15/16 screen costs — high-refresh-rate gaming panels
OMEN gaming laptops are screen-replacement jobs that require more precision than standard Pavilion work. The chassis is thinner and the lid assembly uses adhesive in addition to screws. More importantly, the panels themselves are high-specification.
What “144Hz” and “240Hz” mean and why they cost more
A standard laptop screen refreshes its image 60 times per second (60Hz). A 144Hz screen refreshes 144 times per second, and a 240Hz screen refreshes 240 times per second. This matters for gaming because fast-moving game scenes (a player turning quickly, a bullet trajectory) are rendered in between screen refreshes, causing the motion to look blurred or torn on a 60Hz screen. Higher refresh rates show more frames per second, so fast movement looks smoother and reaction times feel more responsive. The electronics inside a 144Hz or 240Hz panel are more complex (requiring faster drive circuitry) which makes them significantly more expensive to manufacture and source as replacements.
OMEN 15 (144Hz FHD)
15.6-inch IPS panel with 144Hz refresh. The most common OMEN screen replacement. Panel availability is reasonable but not as wide as the Pavilion 15 FHD. Connector type is eDP 40-pin (vs the Pavilion’s 30-pin) — confirm before ordering a panel online. Labour time is slightly longer due to the tighter chassis. Cost: ₹8,500–₹13,000.
OMEN 16 (240Hz FHD)
16.1-inch IPS panel at 240Hz. The larger format and higher refresh specification make this one of the more expensive screen replacements in the HP range outside the Spectre x360. The OMEN 16 lid also has RGB lighting integrated around the bezel which must be disconnected before the panel can be removed. Cost: ₹11,000–₹17,000.
Spectre x360 screen costs — OLED, 4K, touch = most expensive HP screen job
The HP Spectre x360 is both HP’s most premium laptop and its most complex screen replacement. Every aspect of the Spectre’s screen assembly is different from a standard laptop: the 360-degree hinge requires the cable routing to accommodate full rotation, the OLED or 4K IPS touch panel is bonded to a glass digitiser, and the bezel is part of the structural lid frame rather than a separate pop-off plastic piece.
Spectre x360 13.5”/14” (4K OLED touch)
OLED panels in the Spectre x360 use a different backplane technology from IPS — individual organic compounds emit light at each pixel rather than using a backlight layer. This means the panel is thinner, more fragile during handling, and requires very specific tools to remove from the glass cover layer. A crack anywhere in the OLED stack requires full panel replacement — there is no sub-panel repair for consumer OLED at this price point. Cost: ₹14,000–₹22,000. This is the top of the HP screen replacement range.
If your Spectre x360 has OLED burn-in (a permanent ghost image of static screen elements from extended high-brightness use), panel replacement is the only remedy. Our full HP guide covers the prevention steps: HP laptop repair guide for India. All Spectre x360 screen queries are also handled through our HP service hub.
Envy 13/15 and Victus 15 — mid-range screen guide
Envy x360 13 and 15 (FHD IPS touch)
The Envy x360 is a 2-in-1 convertible like the Spectre but at a mid-range price point. Screens are FHD IPS with touch — not OLED, which keeps replacement costs meaningfully lower than the Spectre. The 360-degree hinge routing applies here too, so cable handling requires care. Envy x360 panels are more widely available in the Indian market than Spectre OLED. Cost: ₹7,500–₹12,000.
Victus 15 (144Hz FHD)
The Victus 15 is HP’s budget gaming entry point and uses a 15.6-inch IPS panel at 144Hz. Same high-refresh premium as the OMEN 15, but the Victus chassis is easier to disassemble (slightly less premium build, but more technician-friendly). Panels are increasingly available as the Victus becomes the dominant HP gaming model in the ₹50,000–₹80,000 segment. Cost: ₹7,500–₹11,500.
Cost table: HP screen replacement by model
| HP Model / Series | Screen Type | Replacement Cost (₹) |
|---|---|---|
| Pavilion 14 (HD/FHD non-touch) | IPS/TN 14” | 3,800 – 6,500 |
| Pavilion 15 (FHD non-touch) | IPS 15.6” | 5,500 – 8,500 |
| Pavilion 15 (touch FHD) | IPS touch 15.6” | 7,000 – 10,500 |
| EliteBook 840 G5/G6 (FHD) | IPS 14” business | 6,000 – 9,500 |
| EliteBook 840 G8/G9 (FHD/Sure View) | IPS + privacy filter | 8,000 – 13,000 |
| OMEN 15 (144Hz FHD) | IPS 15.6” 144Hz | 8,500 – 13,000 |
| OMEN 16 (240Hz FHD) | IPS 16.1” 240Hz | 11,000 – 17,000 |
| Envy x360 13/15 (FHD touch) | IPS touch | 7,500 – 12,000 |
| Spectre x360 (4K OLED touch) | OLED 4K 13.5”/14” | 14,000 – 22,000 |
| Victus 15 (144Hz FHD) | IPS 15.6” 144Hz | 7,500 – 11,500 |
Indicative ranges. Exact cost confirmed over WhatsApp after the ₹149 doorstep diagnosis and panel identification.
How we identify the correct replacement panel
Every HP screen replacement begins with panel identification before we order any part. An incorrect panel — the right size but wrong connector pitch, or right resolution but wrong refresh rate — will not work even if it physically fits into the lid frame. Here is the identification process:
- Model number sticker (bottom of laptop): The HP model number (e.g., “HP Pavilion 15-eg3075TU”) tells us the generation, CPU class, and market configuration. We look this up against HP’s part database.
- Panel sticker (back of panel, visible when the screen is removed): The panel manufacturer and part number (e.g., “BOE NV156FHM-N48”) is the most precise identifier. If the existing screen is cracked but readable in part, we can often get this without full disassembly.
- Key parameters confirmed: Size, resolution, refresh rate (critical for OMEN/Victus), connector type (eDP 30-pin vs 40-pin), touch or non-touch, and hinge type (standard vs 360°).
- Source and verify: We source from HP-authorized distributors and channel partners in India. For OLED panels (Spectre x360), we verify the eDP protocol compatibility before opening the machine.
This process takes place during the ₹149 diagnosis visit. You are never asked to order a panel yourself or guess at compatibility.
DIY screen swap — what can go wrong and why most customers hand it over
HP screen replacement is one of the repair jobs most commonly attempted as DIY, and one of the most commonly half-finished before calling a technician. The common failure points:
- Bezel damage on thin-lid models: The Spectre x360, Envy x360, and OMEN 16 use glued bezels. Prying too aggressively cracks the bezel frame, which is a cosmetic part not covered by any technical repair — it must be replaced separately at additional cost.
- eDP connector tear: The video cable connects to the panel via a ZIF (Zero Insertion Force) connector. The latch that holds the connector is 1–2mm wide on most HP models. Forcing the cable out without releasing the latch tears both the cable and the connector, turning a ₹6,000 screen job into a ₹10,000+ cable + screen job.
- Touch cable omission: On touch models, the digitiser cable is a second ribbon cable. Many first-time DIYers reconnect the display cable but forget the digitiser cable. The screen shows an image but touch stops working, and a second disassembly is needed.
- OLED handling: OLED panels are flexible; bending them even slightly during handling causes permanent damage. These panels must be handled flat, on a padded surface, and must not be placed glass-side down. This is not a beginner’s repair.
Our recommendation: Pavilion 15 non-touch FHD on a machine you are comfortable opening — yes, DIY is feasible if you are technically confident and watch a model-specific video before starting. Everything else: hand it over. WhatsApp us the model and we’ll confirm whether your specific variant is DIY-safe before you touch a screwdriver.
What we do at our workshop
Our Secunderabad workshop handles HP screen replacements across all models, from Pavilion 14 HD to Spectre x360 OLED. The standard process: ₹149 doorstep visit for diagnosis and panel identification, WhatsApp quote with the exact panel cost and labour charge, work begins only on your approval. Panels sourced the same day for common models (Pavilion 14/15 FHD); 24–48 hours for less common or high-spec panels (OMEN 240Hz, EliteBook Sure View, Spectre x360 OLED). 30-day warranty on the replacement panel and labour. No Fix No Fee applies if we are unable to complete the job.
Outside a serviceable area? We accept courier-in repairs from anywhere in India. Ship to our Secunderabad store, we diagnose and quote before opening. Details: Ship your laptop for repair. All HP models are serviced — see the full model list on our HP service hub.