Picture pale on your Sony VPL-DX102 or VPL-DX122? The LMP-D213 module is end-of-life. Genuine 215W UHP lamp swapped at your address in Hyderabad.
Sony LMP-D213 lamp at your door in Hyderabad — ₹149visit charge
Lamp warning blinking on your Sony VPL-DX102?
The LMP-D213 is the genuine Sony lamp module for the VPL-DX102, VPL-DX122, VPL-DX142, VPL-DW122, VPL-DW126, and VPL-DW127. Original UHP (ultra-high-pressure mercury vapour bulb) inside Sony-spec housing, doorstep fit in 20 minutes including the lamp-hour timer reset through the service menu. Sony VPL projectors are precision instruments, and we carry only OEM Sony modules. Pay only after the picture is bright again.
Free issue check included — we’ll be in touch shortly
₹149 visit + on-site checkOne lamp module. Six Sony VPL projectors. Genuine Sony part LMP-D213 with the original UHP (ultra-high-pressure mercury vapour bulb) pre-fitted into the Sony-spec reflector housing. The bulb, reflector, leads, and connector arrive as a single sealed unit: no optical alignment, no fingerprints on the glass, no second visit. Sony VPL projectors have tighter thermal tolerances than most business projectors, so using the OEM lamp is more important here than with other brands.
Same lamp module, same fit, same 30-day warranty across all six models. For more Sony VPL repairs beyond lamp replacement, see our Sony Projector Service hub. Not certain about your model? Send a photo of the rear label to WhatsApp 7702503336 and our certified technician confirms the right fitment before your visit.
XGA, 2,600–3,200 lumens, business and education. The DX-series is Sony's mainstream business projector line, used across Hyderabad corporate offices and lecture halls in Jubilee Hills, Somajiguda, and Begumpet. All three use the identical LMP-D213 module. Rated 4,000 hours in Normal mode, 6,000 hours in Low mode.
WXGA widescreen, 2,600–3,000 lumens. The DW-series adds widescreen output for 16:10 presentations and cinema-format content. Common in Hyderabad AV installations, event venues, and premium home theatres in Banjara Hills and Gachibowli. All three use the LMP-D213. Doorstep fit with brightness test and timer reset included.
Sony VPL projectors use tighter-tolerance optical cavities than most business brands. A clone lamp with the wrong arc gap or incorrect colour temperature throws off the focus, colour, and thermal balance. We have handled Sony VPL ballast failures in Hyderabad caused by clone lamps spiking current at ignition. OEM only.
UHP lamps fail gradually. Sony VPL firmware typically shows a warning 50 to 100 hours before complete failure, enough lead time to schedule a doorstep fit before the next presentation or event.
Picture pale even at maximum brightness, colours desaturated and grey. The UHP arc has weakened past the point of recovery. Replacement is the only fix; cleaning the bulb does nothing once the arc output has degraded significantly.
Sony VPL cuts out mid-slide, then refuses to restart for five to ten minutes. The lamp has hit the thermal cut-off. The fault repeats with shorter and shorter intervals until the lamp fails completely.
Sony VPL lamp indicator blinking or lit. Firmware has clocked past 4,000 hours in Normal mode (or 6,000h in Low). Brightness is already below 70 percent, even if the picture still appears acceptable to the eye.
UHP bulbs sometimes pop when they fail under pressure. Unplug the projector immediately and call us. Mercury vapour stays inside the Sony housing and the next ignition attempt can damage the ballast (the high-voltage starter circuit).
The reflector or internal wiring of the LMP-D213 module has overheated. Replace the entire module. Burnt-reflector lamps cause inconsistent brightness and a high probability of repeat failure, with increasing risk to the Sony VPL ballast.
Even if the Sony VPL picture still works at 3,500 hours, brightness has typically dropped 40 to 50 percent. Presentations and cinema content look muted. Replace before the next key event, not after it.
Sony LMP-D213 lamp replacement in Hyderabad starts at ₹9,500 for the genuine 215W module plus doorstep fit. Visit charge is ₹149 and is waived when you proceed with the replacement. Combo service with air-filter wash and lens clean starts at ₹10,500. 30-day warranty on lamp and labour. No Fix, No Fee. Free fixed-price quote before any work begins.
From WhatsApp to working Sony projector in four steps. Office, conference room, home theatre, or event venue, anywhere in Hyderabad from Madhapur to Secunderabad.
WhatsApp 7702503336 with the VPL model and a photo of the lamp warning or rear label. We confirm LMP-D213 availability and quote in five minutes.
Corporate office in HiTec City, home AV room in Jubilee Hills, event space in Banjara Hills. We confirm a 60 to 120 minute slot, sometimes same hour for stocked SKUs.
Genuine Sony LMP-D213 lamp, ESD-safe gloves, brightness meter, and the cable for lamp-hour timer reset through the service menu. Old lamp removed under mercury-safe handling, new module fitted correctly.
Test slide projected, brightness measured in front of you. 100 percent satisfaction first, then pay by UPI, cash, or net banking. 30-day warranty. No Fix, No Fee.
Sony VPL projectors are precision 3LCD instruments. Generic LMP-D213-marked lamps on Amazon and B2B marketplaces are clone modules with non-Sony arc geometries. A clone lamp in a Sony VPL results in colour shift, focus degradation, and frequent ballast damage. Since 2007 we have serviced Sony VPL units across Jubilee Hills, Madhapur, Gachibowli, and Secunderabad, always with OEM parts only.
Original Sony LMP-D213 delivers a true 215W with the precise arc geometry for Sony's 3LCD optics. Clone lamps run 185 to 200W and misalign with the lens array, causing soft focus and colour fringing.
Genuine LMP-D213 modules deliver the rated 4,000 hours in Normal mode. Clone modules rated 5,000h on the box typically fail at 800 to 1,200 hours. The Sony OEM module costs more upfront and far less per hour of quality output.
OEM Sony lamps draw clean, predictable current at strike. Clone bulbs spike on ignition and damage the ballast (the high-voltage starter board). A Sony VPL ballast repair adds ₹3,000 to ₹7,500 to the bill.
Every Sony lamp we fit carries a 30-day replacement warranty. We are in Secunderabad, face-to-face. Generic sellers ship from outside Hyderabad and reject claims after 7 days with no accountability.
Engineer arrives at your home theatre in Jubilee Hills, office in Madhapur, or AV venue in Gachibowli. No need to dismantle a ceiling-mounted Sony unit. ₹149 visit charge, waived if you proceed with replacement.
A Sony lamp warning does not always mean the lamp has failed. Sometimes the ballast is the real fault. We measure brightness on-site first, quote second, replace only with your sign-off. No Fix, No Fee.
Every projector SKU below has its own page with detailed pricing, compatibility, and FAQs.
Real ratings from customers across Hyderabad. Tap the badge to read live reviews on Justdial.
Questions Hyderabad customers ask before booking a Sony VPL lamp replacement. If yours isn’t covered, WhatsApp 7702503336 and we reply within minutes (Mon–Sat, 10 AM–8 PM).
Genuine LMP-D213 module, doorstep fit across Hyderabad, 30-day warranty. Pay only when the picture is bright again.