BenQ lamp specialists Since 2007 1 Lakh+ repairs

Image gone dim?

Picture pale even at max brightness on your BenQ SX912, MH740 or SH915? The 5J.J8805.001 module is end-of-life. Genuine UHP lamp swapped at your address.

BenQ 5J.J8805.001 lamp at your door in Hyderabad — ₹149visit charge

Lamp warning blinking on your BenQ?

The 5J.J8805.001 is the genuine BenQ lamp module for the SX912, MH740, and SH915. Original Philips or Osram UHP bulb, BenQ-spec housing, doorstep fit in 20 minutes including the lamp-hour timer reset through the service menu. Pay only after the picture is bright again.

Lamp Dim / Dead Lamp Warning LED Sudden Shutdown Bulb Pop 3,000h+ Hours Used Burnt Smell

Book your BenQ lamp fit

Free issue check included — we’ll be in touch shortly

₹149 visit + on-site check
Same-Day
Doorstep across 50+ Zones
30-Day Warranty
No Fix — No Fee
BenQ 5J.J8805.001 lamp module — bulb, housing, leads, pre-assembled.

The 5J.J8805.001 module, end-to-end

One lamp module. Three projectors. Genuine BenQ part with the original Philips or Osram UHP bulb pre-fitted into the BenQ-spec housing. The bulb, reflector, leads, and connector arrive as a single sealed unit, so the fit is mechanical, not optical: no alignment, no fingerprints on the glass, no second visit.

Wattage180W UHP
Lamp life (Normal)3,500 hours
Lamp life (Eco)5,000 hours
Module weight362 g
Part number5J.J8805.001
Warranty30 days

Which BenQ Projectors Use the 5J.J8805.001 Lamp

Same lamp module, same fit, same 30-day warranty. Not certain about your model? Send a photo of the projector’s rear label to WhatsApp 7702503336 and our certified technician confirms the right fitment before your visit.

BenQ SX912

XGA, 5,000 lumens, conference. The SX912 is the boardroom workhorse in HiTec City and Hitech corporate offices. The 5J.J8805.001 is the OEM lamp; expect about 3,500 hours before brightness drops noticeably. Lamp swap, filter wash, lens clean: ₹9,200.

BenQ MH740

Full-HD, 4,000 lumens, education. Common in Hyderabad classrooms, training rooms, and college labs. The lamp module is identical to the SX912. Onsite fit and the lamp-hour timer reset (through the projector’s service menu) in about 20 minutes.

BenQ SH915

Full-HD, 4,000 lumens, business. Long-runtime corporate unit. If your SH915 also throws a temperature warning after the lamp swap, the air filter is choked: filter wash is included in the combo service at no extra labour cost.

Six Signs Your BenQ Lamp Is Failing

UHP lamps fail gradually. The warning LED usually appears 50 to 100 hours before total failure, which is enough lead time to schedule a doorstep fit before the next big meeting or class.

Image visibly dim, washed out

Picture looks pale even at maximum brightness, colours flat and grey by 30 to 40 percent. UHP arc has weakened. Replacement is the only fix; cleaning the bulb does nothing once the arc has degraded.

Sudden shutdowns mid-presentation

Projector turns off in the middle of a slide, then refuses to restart for five to ten minutes. The lamp has hit the thermal cut-off. Once it cools, it boots, but the fault repeats and worsens.

Lamp warning LED on the top panel

Red or amber lamp indicator. The firmware has clocked past 3,500 hours in Normal mode (or 5,000 in Eco). Brightness has already dropped below 70 percent of original output, even if the picture still looks acceptable to the eye.

Loud popping noise on power-up

UHP bulbs sometimes pop when they fail. Stop using the projector immediately, unplug, and call us. Mercury vapour stays inside the housing and the next ignition attempt can damage the ballast (the high-voltage starter circuit).

Burnt smell from the projector vents

The reflector or wiring inside the lamp module has overheated. Replace the entire module, not just the bulb. Burnt-reflector lamps cause inconsistent brightness and a 50 percent risk of repeating the failure within months.

3,000+ lamp hours on the counter

Even if the picture still works, brightness has typically dropped 50 percent. Presentations look dull, colour grading is off. Replace before the next product launch or important class, not after.

BenQ 5J.J8805.001 Lamp Replacement Cost

BenQ 5J.J8805.001 lamp replacement in Hyderabad starts at ₹8,500 for the genuine module plus doorstep fit. Combo service with filter wash and lens clean starts at ₹9,200. Visit charge is ₹149 and is waived if you go ahead with the replacement. Free fixed-price quote before any work begins. 30-day warranty on lamp and labour. No Fix, No Fee.

Lamp Replacement

5J.J8805.001 lamp + doorstep fit₹8,500 – ₹10,500
Lamp + filter wash + lens clean₹9,200 – ₹11,200
Lamp-hour counter reset only₹500 – ₹1,000
On-site brightness diagnosis₹149

Other BenQ Repairs

Ballast (high-voltage starter) repair₹2,500 – ₹6,500
Power supply / capacitor repair₹2,500 – ₹8,000
HDMI input board repair₹3,500 – ₹8,500
Cooling fan replacement + thermal clean₹2,000 – ₹4,500
DMD chip diagnosis (BenQ DLP)₹3,500 – ₹12,000

Visit & AMC

Doorstep visit charge₹149
Free pickup & drop within HyderabadFree
Corporate / school AMC (per unit/yr)₹4,000 – ₹9,000
Service Care Pack (Windows ₹2,999/yr)View →
Lamp warranty30 days

How BenQ Lamp Doorstep Service Works

From WhatsApp to working projector in four steps. Office, school, conference room, or home AV setup, anywhere in Hyderabad.

1

Tell Us Your BenQ Model

WhatsApp 7702503336 with the projector model and a photo of the lamp warning. We confirm we have your part available for fitting and quote within five minutes.

2

Pick Time & Address

Office in HiTec City, school in Banjara Hills, home AV room in Jubilee Hills. We confirm a 60 to 120 minute slot, sometimes same hour for stocked SKUs.

3

Engineer On-Site With the Module

Genuine 5J.J8805.001 lamp, ESD-safe gloves, brightness meter, and the cable for lamp-hour timer reset all carried in. Old lamp removed under mercury-safe handling, new one fitted.

4

Test & Pay After Fix

Test slide projected, brightness measured in front of you. 100 percent satisfaction first. Then pay by UPI, cash, or net banking. 30-day warranty. No Fix, No Fee.

Why Hyderabad Schools, Offices & AV Owners Pick Us for BenQ Lamps

Generic 5J.J8805.001-marked lamps on Amazon and B2B marketplaces are reflector clones with non-UHP bulbs. They burn out in 3 months and frequently kill the projector ballast on the way out. We have replaced five SH915 ballasts in 2024 alone, all on units fitted with sub-₹3,000 clones.

Correct UHP Arc & Wattage

Original Philips and Osram bulbs hit a true 180W with the right arc length. Clones run 165 to 170W and shift the colour balance. Picture looks dim and slightly green from day one.

3,500 Hours, Not 600

Genuine modules deliver the rated 3,500 hours. Clones rated 3,500h on the box typically fail at 600 to 800 hours. The original bulb costs more upfront and less by the hour.

Ballast-Safe Ignition

OEM lamps draw clean, predictable current at strike. Clones spike on ignition and damage the ballast (the high-voltage starter board). One failed ballast doubles the repair bill.

30-Day Warranty, On Paper

Every lamp module we sell carries a 30-day replacement warranty. Generic Amazon listings ship from outside Hyderabad and reject claims after 7 days. Local accountability matters.

Doorstep, Not Counter

Engineer arrives at your office, school, or home AV room. No need to dismount a ceiling-installed projector. ₹149 visit, waived if you go ahead with the replacement.

Free Diagnosis First

Lamp warning blinking does not always mean the lamp has failed. Sometimes the ballast is the real fault. We measure first, quote second, replace only with your sign-off. No Fix, No Fee.

Verified on Justdial

Hyderabad customers, in their own words.

Real ratings from customers across Hyderabad. Tap the badge to read live reviews on Justdial.

JUSTDIAL REVIEWS

BenQ 5J.J8805.001 — Honest Answers

Questions Hyderabad customers ask before booking a BenQ lamp replacement. If yours isn’t covered, WhatsApp 7702503336 and we reply within minutes during working hours.

Is this a genuine OEM lamp or a generic clone?+
We supply only the genuine BenQ 5J.J8805.001: original Philips or Osram UHP bulb inside the BenQ-spec housing. Generic clones cost less but lose 30 percent brightness inside six months and frequently damage the ballast. We do not stock those, regardless of customer request.
Which BenQ projectors does it fit?+
The BenQ SX912, MH740 and SH915. A handful of XGA business projectors from the same 2013 generation share the same lamp module. Send a photo of the projector’s rear label to WhatsApp 7702503336 and we confirm fit before our technician fits it.
How long does the lamp last?+
Rated 3,500 hours in Normal mode and up to 5,000 hours in Eco / SmartEco. Real-world Hyderabad usage in classrooms and conference rooms typically lands at 2,800 to 4,000 hours before brightness drops below 70 percent.
Do you replace the lamp at our address?+
Yes. A certified Laptop Repair World engineer arrives at your office, school, or home with the lamp module, ESD-safe tools, a brightness meter, and the cable to reset the lamp-hour timer through the projector’s service menu. The fit takes about 20 minutes. ₹149 visit charge, 30-day warranty on lamp and labour.
What if the projector still fails after the new lamp?+
The fault is then in the ballast (the high-voltage circuit that ignites the lamp), the power supply, or the main board. We diagnose on the spot and quote separately. The replacement lamp keeps its 30-day warranty regardless. No Fix, No Fee on the diagnosis.
Can I install the lamp myself?+
Technically yes. Practically risky. UHP bulbs are pressurised mercury vapour: a fingerprint on the glass causes the bulb to crack within hours of use, and the lamp-hour timer must be reset via the service menu, otherwise the projector will keep showing the lamp warning. Doorstep fit is safer and the cost difference is small.
How much does it cost?+
Genuine module plus doorstep fit: from ₹8,500. Combo with filter wash and lens clean: from ₹9,200. Pure on-site diagnosis: ₹149, waived if you proceed with the fit. Free fixed-price quote before any work begins.
Which Hyderabad areas do you cover?+
Doorstep service across all 40+ Hyderabad zones from our Secunderabad store: Banjara Hills, Jubilee Hills, Film Nagar, Somajiguda, Begumpet, HiTec City, Madhapur, Gachibowli, Kondapur, Kukatpally, Miyapur, Ameerpet, Dilsukhnagar, Mehdipatnam, LB Nagar, Uppal, and 25+ more.

Lamp warning blinking on your BenQ? Same-day fix.

Genuine 5J.J8805.001 module, doorstep fit in Hyderabad, 30-day warranty. Pay only when the picture is bright again.